Note for Mask & Relay Users: This page currently cannot deterimine if you're connected to the Mask & Relay network. If so connected, you're traffic is relayed across at least three hosts on the TOR network prior to arriving here. Check the TOR Check Page to determine if you're browsing through TOR. Sorry for the inconvenience. We're working to remedy this soon.

 

Something seems to be awry. The IP address you're connecting from isn't part of the Tunnel 27 network.

Potential causes of this could be:

  1. Tunnel 27 Client Not Started

    Are you sure you correctly installed and started the Tunnel 27 client? Double check any installation instructions you used to install the client.

  2. Previously Configured Proxies

    You could potentially have a previously configured proxy in your browser or in your operating system. If this is intentional, then this page may not be an issue if this is the desired effect. Otherwise, you can disable the proxy.

  3. Incorrectly Setup Routing Tables

    You may possibly be connected to Tunnel 27 correctly but not sending packets through the encrypted tunnel (instead sending them through the default normal network interface). The Tunnel 27 client should set this automatically for you but something could have gone wrong. Double check your route settings to see that traffic is being routed through the encrypted tunnel.